Our Thin Epoxy Resin is a low viscosity liquid epoxy resin based on Bisphenol-A. This Thin Epoxy Resin System is a high-quality resin which is popular for lamination with fiberglass, carbon fiber, Kevlar or any type of reinforcement. The syrup-like consistency will generate fast wet-out and easy application of any reinforcement. We recommend choosing your hardener below based on your temperature, curing thickness, desired working time and desired drying times. The Thin Epoxy will produce a low viscosity, semi-clear, low odor epoxy that is not only ideal for layup use, but also as a sealer of porous substrates such as wood because of its penetrating power. You can easily make an adhesive, fairing putty or filler when combining the Thin Epoxy Resin System with a product from our selection of powder fillers.
2:1 Hardener will provide the maximum in possible working time. This hardener should not be used in temps under 70° F unless a very long curing time is desired. Slow hardener is ideally used at temperatures above 80° F for optimal overnight curing.
3:1 Hardener is considered to be the best of both worlds as a medium hardener, our 2:1 epoxy will cure slower and our 4:1 hardener epoxies will cure much faster.
4:1 Hardener will provide the most rigid laminate qualities due to its extremely fast curing time.
This epoxy is NON-blushing.
Note: This resin system has a shelf life of approximately one year. To ensure quality results and proper curing, please make sure to use the resin shortly after purchase.
Wet lay-up laminating
Grouts and coatings
Potting and Encapsulation
Low viscosity and good color