System Three Silver Tip Epoxy Resin kit with Fast Hardener

SKU: 2125|2126-Kit



    Add to Compare


    Silver Tip Epoxy with Fast Hardener Kit

    SilverTip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-composite boatbuilding. It will outperform any other product in these applications. SilverTip Epoxy is designed for use with fiberglass, Kevlar, Dynel and graphite as well as on bare wood. It has superior wet-out characteristics with little tendency to foam or trap air.

    Both the resin and hardener are nearly colorless and are used in an easy 2:1 volumetric ratio. SilverTip Epoxy cures to a brilliant blush-free film with either the fast or slow hardener eliminating secondary bonding concerns as experienced with other epoxies. The working time is longer than most boat building epoxies without extending cure time. The cured film is tough and resilient with better heat resistance than other epoxies cured at room temperature. Fillers, wood flour, and bulking agents can be combined with SilverTip Epoxy, however, we suggest using the other members of the SilverTip series for adhesive, filleting and fairing applications.

    • Exceptionally fast wet-out of fiberglass and other reinforcing media.
    • Superior defoaming properties and little tendency to float fabric.
    • Resistance to print-through.
    • Has excellent hot weather performance following a mild post-cure compared to most room temperature cure resin systems.
    • Cures without forming an amine blush with either the fast or slow hardener.
    • Cures quickly to a sandable state (no sanding required between coats when recoating within 72 hours).
    • Sandable same day with fast hardener.
    • Features a convenient 2:1 mixing ratio.
    • Cures exceptionally clear for bright finished applications.
    • Compatible with all 2-part and most 1-part marine primers.

    Recommended Uses

    Use at a simple 2:1 volume ratio with either the fast or slow hardener. Use at temperatures as low as 35°F with no limitations on humidity. Even at lower temperatures and higher humidity this resin will not blush on curing. The medium-low viscosity of SilverTip Epoxy wets out fiberglass cloth quickly and allows for use “as is” for either coating or fiberglass work. SilverTip Epoxy has been formulated as an optimized system for coating and fiberglassing wooden boats, the repair of fiberglass boats and for use with carbon fiber sporting goods & autobody parts.

    0/5 (0 Reviews)

    Additional information


    , ,



    Cure Time

    Used For/Type

    Pot Life

    Max Service Temperature

    Product Type (i.e. resin, hardener, etc)

    Shelf Life

    UV Protection?



    Post Cure Required?

    Possible Amine Blush?



    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.


    Silver Tip Resin SDS

    Silver Tip Fast Hardener SDS

    Silver Tip Resin & Hardeners TDS

    Epoxy Mixing Guide

    Compare Products