RDR-2250 is a high temperature laminating system that cures at room temperature with post cure. It is extremely tough, has good dimensional stability with good heat distortion for tools requiring elevated temperatures.
Upon Completion, the tool should be allowed to cure at ambient temperature for 24 hrs. At that point, apply an oven cure, cycle should be 50°F per hour(tool temperature, not air temperature). Not more than 5°F per min.
1-Hour 100°F , 1-Hour 150°F,1-Hour 200°F,1-Hour 250°F,2-Hour 300°F, Back down the same
This product is sold by weight. 8 Lbs = aprox 1 Gallon; 50 Lbs = aprox 5 Gallons.
Use the RDR-2250 Resin with RDH-9106 or RDH-9234 Hardeners.
TYPICAL PHYSICAL PROPERTIES
|Pot Life @ 72oF (200g mass)||90 mins||165 mins|
|Ratio by Weight||100 pbw to 12 pbw||100 pbw to 15 pbw|
|Ratio by Volume||5.2 to 1||5.5 to 1|
|Cure Time||24 hrs||24 hrs|
|Flexural Strength @ 72oF||36,400 psi||38,400 psi|
|Flexural Strength @350||5,600 psi||5,600 psi|
|Hardness, Shore D @ 72oF||85||85|
|Shelf Life Resin / Hardener||1 year||1 year|
To ensure quality results and proper curing, please make sure to use the resin shortly after purchase. This resin is available in 1 Gallon & 5-Gal Pails, Drums and Totes.