Description
Adekit A 236 with -25 minute (Fast) or -125 minute (Slow) hardeners
POLYURETHANE ADHESIVE SYSTEM
FOR LARGE COMPOSITE PARTS BONDING
DESCRIPTION
Bonding of large composite parts (RTM, SMC, GRP, Laminate), metallic structures, and plywood for applications requiring high performances and flexibility in transport industries (truck, bus) and Marine (hull bonding, deck bonding, interior design). Two cure speeds are available: Adekit A236 – 25 (25 minutes) and Adekit A236 – 120 (120 minutes).
| PROPERTIES | |
| ¡ Non sagging paste product with gap fill up to 30mm in vertical and
ceiling application; 60mm in horizontal ¡ Two separate cured color options/mixing colors depending on system used (25 minutes or 120 minutes). ¡ Excellent strength to dynamic loads (vibration and impact) |
¡ Odor and solventfree ¡ Long open time with reduced handling time ¡ Usable with pneumatic dispensing guns ¡ Comes in 400 ml cartridges |
The cartridges must be stored upright, protected from moisture, and at a temperature of between 15 and 25 ° C in their unopened original packaging. The storage is the same for the opened cartridges.́
1. Open the cartridge by percussion
2. Insert the cartridge into the adapted gun
3. Perform product extrusion until both components exit the end of the cartridge to balance the pistons
4. Fix the mixer without modifications
5. Purge about 5 cm of product at the beginning of mixing
6. Perform the bonding respecting the open time and the handling time
In order to maintain product tightness, it is important not to remove the mixer from the cartridge after gluing. We recommend the use of pneumatic guns. It provides a more comfortable use and excellent mixing quality.*
Reviews
There are no reviews yet.