Hexcel HexForce Fiberglass E-Glass Plain Weave 38″/96.52cm 38oz/1288gsm Style 1597 F16 Finish

SKU: F-2151-38

$20.61

On Order - Available soon!

Add to Compare

Enter your email address to be notified when this item is back in stock.

Categories: , ,

Please Note: Due to the nature of composite materials, coloration of fabric may change or darken when resin is introduced to your part/fabric.

Title Range Discount
Per Linear Yard 5 - 9 $19.58
Per Linear Yard 10 - 24 $18.55
Per Linear Yard 25 - 49 $17.52
Per Linear Yard 50 - 99 $17.11
Per Linear Yard 100 + $16.69

Description

Fiberglass Cloth Style 1597 38oz 1288.42gsm F16 Finish

This is a heavy weight fiberglass cloth woven in a triple plain weave. It is best suited for applications where a strong rapid build-up is required and the part is flat or slightly curved since heavy weight materials do not conform to tightly curved parts.

Additional information

Color

Ends Per Inch

30

Pics Per Inch

Unit of Measure

Weave

Brand

Weight

Material Warp

Material Weft

Fiberglass E-glass 38oz 4 Harness Satin Weave Hexcel Style 1597 TDS

Hexcel Fiberglass Finishes

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Our fabrics are sold by the linear yard. The unit price displayed is for 1 linear yard; all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased. Please purchase the number of linear yards that you require. When purchasing multiple yards of the same fabric, you will receive one continuous length of that material. We carefully take that material and roll it onto a cardboard core and wrap clear plastic or Kraft paper over it, making sure to keep the fabric in its first quality condition. We pride ourselves on having one of the best material handling crews possible.
Resin consumption is provided for the approximate amount of resin by weight in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and depends on the user’s techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, not stronger. The average rule of thumb is around 45% (+/- a couple of percent). To calculate actual resin % in your part, a burn test is used. For example, you have a part weighing 100 grams, and you would burn off the resin, which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing, it is hard to give an accurate amount of resin needed to purchase for making your part. However, you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.
Compare Products