Airtech Wrightlon 4600 Perforated Release Film 54″ Width (Remnant)

Description

Airtech Perforated Release Film 54″ Width. This release film is perforated to allow excess resin to travel through to the bleeder material. This material is applied directly over the top of your laminate so that the bleeder or vacuum bag, will not adhere to the part. Perferation type is P3.

DESCRIPTION

Wrightlon® 4600 release film is a low cost high temperature film for use in flat or limited curvature molding applications up to 380°F (193°C). It will release from epoxy and phenolic resin systems. All standard perforations are available. Please see our perforation table in this section.

BENEFITS

Inexpensive film reduces the cost of high temperature vacuum bagging process.
Flat film can be applied quickly and without wrinkles over simple tooling and part shapes.
Highly visible color reduces risk of leaving film on cured parts.

First Quality Remnants:

First Quality Fabric Remnant Rolls are short rolls of fabric, which have no defects in them.  These remnant rolls are either left over fabric from the end of a roll, or sections of fabric which were cut at the wrong length for a specific order.  So instead of discarding the short roll, we package it up and sell it as a First Quality Remnant Roll.  These First Quality Remnant Rolls are sold at 20% off of the retail price of that fabric.

Second Quality Remnants:

Second Quality Fabric Remnant Rolls are short rolls of fabric, which have a defect in the woven fabric in them.  These remnant rolls are cut out of the standard fabrics we sell, but from sections of the rolls that have some defects in them.  These defects make them not good to use if you want to make cosmetic parts, which have perfect woven fabric in them, but can be used as the inner layers of your parts, or if you are making small parts and can cut around the defects.  These Second Quality Remnant Rolls are sold at 25% off of the retail price of that fabric.

All remnant rolls are rounded DOWN to the nearest ½ yard. So a remnant listed as 0.5 yards may actually be between 18” and 35” in length and a remnant listed at 2.0 yards may actually be between 72” and 89” in length.