Airtech AIRDRAW 2 Vacuum Bagging Film (Remnant)

SKU: R-2515

Remnant QualityRemnant LengthPriceBuyhf:att:pa_remnant-qualityhf:att:pa_remnant-length
1st Quality1 Yard1st-quality1-yard
Add to Compare


AIRDRAW 2 Embossed Vacuum Bag Designed For Rapid Air Removal.


Airdraw 2 vacuum bagging film is embossed with a “cracked ice”pattern which allows for rapid air removal when placed under vacuum. The film has been formulated to provide increased stiffness to assist in maintaining a breathable pattern.

Airdraw 2 is not affected by environmental conditions and will not soften in high humidity, allowing superior breathability. It is designed primarily for ply compaction with the added benefits of not requiring a breather. It is embossed from one side of the film, under dose examination; the film has a flat side and a raised side. The outer surface of roll is the the raised side. For best results, place the raised side against the part surface on top of a perforated release film.


  • Embossed pattern provides network of air passageways, eliminating need for separate layer of breather.
  • Improved stiffer formula keeps air path open resulting in better vacuum levels, faster.
  • Wide width makes compacting large parts even faster with no seams required.

First Quality Remnants:

First Quality Fabric Remnant Rolls are short rolls of fabric, which have no defects in them.  These remnant rolls are either left over fabric from the end of a roll, or sections of fabric which were cut at the wrong length for a specific order.  So instead of discarding the short roll, we package it up and sell it as a First Quality Remnant Roll.  These First Quality Remnant Rolls are sold at 20% off of the retail price of that fabric.

Second Quality Remnants:

Second Quality Fabric Remnant Rolls are short rolls of fabric, which have a defect in the woven fabric in them.  These remnant rolls are cut out of the standard fabrics we sell, but from sections of the rolls that have some defects in them.  These defects make them not good to use if you want to make cosmetic parts, which have perfect woven fabric in them, but can be used as the inner layers of your parts, or if you are making small parts and can cut around the defects.  These Second Quality Remnant Rolls are sold at 25% off of the retail price of that fabric.

All remnant rolls are rounded DOWN to the nearest ½ yard. So a remnant listed as 0.5 yards may actually be between 18″ and 35″ in length and a remnant listed at 2.0 yards may actually be between 72″ and 89″ in length.

0/5 (0 Reviews)

Additional information



Unit of Measure

Remnant Length

Remnant Quality


Airtech Airdraw 2-DC TDS

Airtech Airdraw 2 SDS

Resin Compatibility Guide


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Compare Products