Airtech Toolwright 3
Toolwright 3 is an extruded Fluoropolymer film coated with silicone pressure sensitive adhesive. Toolwright 3 has a thinner film than Toolwright 5 version and can be more easily applied over complex contour surfaces. Toolwright 3 has high elongation, good tear strength, high temperature resistance and excellent clean up after removal.
- Extend the life of worn tools avoiding cost of new tools.
- Tougher film is more tear resistant, easier and faster to apply.
- Improved part surface quality.
|Maximum use temperature||500°F (260°C)|
|Carrier type||Extruded fluoropolymer|
|Total thickness||0.003 inch (75 rem)|
|Film thickness||0.002 inch (50 rem)|
|Adhesive thickness||0.001 inch (25 rem)|
|Elongation at break||350 %|
|Shelf life||18 months from date of shipment when |
stored in the original packaging at 72°F (22°C)
This item is listed by the linear yard, which is 36" long by the 48" width. If you purchase a qty of 2, you will receive one continuous piece of fabric 72"x48" and so on. We will leave the fabric in one continuous piece.