Web-Lock Stabilized Fabric Samples

Unit of Measure:

This is a sample booklet of Web-Lock Stabilized Fabrics that we offer. In the booklet we provide standard versions of fabrics as well as the same material with Web-Lock Stabilization for your comparison.  Each sample is individually labelled for easy identification as well as providing important information specific to each material type.

The fabrics will be displayed showing the side with Web-Lock applied to it. When using fabrics that have been treated with Web-Lock the Web-Lock side would be the backside as to not affect the visual appearance of your finished part.

Color Disclaimer: Due to individual user's monitor settings, calibrations and lighting sources, the colors that appear on your screen may not be an exact representation of the actual product.

This book includes one sample of each of the following fabrics:

Model Description
 F-1902-WL  Carbon Fiber Fabric 2x2 Twill 3K 50" 7.23oz/245gsm Toray T-300 With Web-Lock Stabilization 
 F-1835-WL  Carbon Fiber Fabric 2x2 Twill 3k 50"/127cm 6oz/203.43gsm Toray T-300 With Web-Lock Stabilization
 F-1835  Carbon Fiber Fabric 2x2 Twill 3k 50"/127cm 6oz/203.43gsm Toray T-300  NO Web-Lock Applied
 F-600-WL  Carbon Fiber Fabric 4x4 Twill 3K 50" 8.3oz/281.42gsm With Web-Lock Stabilization 
 F-376-WL  Carbon Fiber/Red Kevlar Fabric 2x2 Twill 3k 50"/127cm 5.5oz/186gsm With Web-Lock Stabilization



Web Lock Logo

Web-Lock is a fabric stabilization process that is achieved by applying high heat and pressure to lock every filament of fabric together, ensuring perfect cosmetic and structural symmetry. Currently, this process is ONLY offered by Composite Envisions. You may have seen or tried stabilized fabrics in the past, but we've found that these existing products can often be too stiff to work with, require large volume orders with high costs, or simply aren't available in the fabric or time frame needed. All these reasons lead us to one solution - Web-Lock. Web-Lock is the material that we believe solves all the current problems and exceeds the finished fabric performance on all levels. Web-Lock will help you improve your ease of manufacturing, saving you time and money.

The side that has the Web-Lock on it will not make a good finish for your parts as you will still be able to see the stabilizer in a finished part. When using make sure to have the stabilized side face the non cosmetic side of your part. If you have a part that requires to have a perfect finish on both side we would recommend using two layers of this material and face the stabilized sides together. 

Advantages of Web-Lock

 Web-Lock is applied at Composite Envisions, allowing flexibility of coating options. Currently, Web-Lock has been applied to Carbon Fiber, Kevlar, Fiberglass and will be available on other composite fibers.

 Low MOQ's. Can be applied to smaller runs of fabric, up to full 100+ yd rolls.

 Reduce employee training for the time it takes to make quality composites.

 Reduce waste as a result of less damaged cloth.

 Standard heat range is 225°F/107°C. Coatings can range from 194°F/90°C to 392°F/200°C (only capable now of doing up to 248°F/120°C material)

 Current version only adds .175oz/6gsm of weight to the fabric for little interference. (weights available from 4-15gsm to change performance characteristics)

 No release liner required between layers of material; reduces waste, lowers cost and makes material easier to use.

 Compatible with most resin systems on the market, including polyester, vinylester and epoxy resin.

 Can be applied to various widths ranging from narrow tapes to 50" wide.

 Prevents fabric weave from shifting but stretches to allow the fabric to stay conformable.

 Keeps fiber coverage even to avoid resin rich areas and failure points.

 Produced in the USA. Our goal is to make Web-Lock the new standard for high-end composite fabrications meet your supply needs while exceeding your expectations.