TeXtreme® 5020 - IM Intermediate Modulus UNI Spread Tow Carbon Fiber Tape 18k 1.97"/50mm 2.24oz/76gsm 100M Roll

Unit of Measure:
100M Roll
Tow Size:
Shipping Prohibited Outside United States

Out of stock

Quantity Buy 5 - 9 Buy 10 - 24 Buy 25 - 49 Buy 50 - 99 Buy 100 or above
Per 100M Roll $ 228.29 $ 223.63 $ 218.97 $ 209.66 $ 198.01
Bulk Pricing
Per 100M Roll
Buy 5 - 9
Buy 10 - 24
Buy 25 - 49
Buy 50 - 99
Buy 100 or above
$ 228.29
$ 223.63
$ 218.97
$ 209.66
$ 198.01

TeXtreme 5020 - IM Intermediate Modulus 76gsm/2.24oz 50mm/1.97" Width Uni Directional Spread Tow Carbon Fiber Tape. This very high performance tape consists of carbon fiber yarn that has been carefully spread out into an ultra-light, ultra-strong tape. These tapes are the same material used in our TeXtreme Spread Tow fabrics. These tapes use narrow 18k carbon yarn which is spread out into widths that can range from 20mm up to 50mm. This tape is used in the same fashion as a typical uni carbon tape, however most uni tapes are 300gsm or more. These ultra-light tapes let you apply just the amount of reinforcement needed so you can achieve the best performing and lightest part possible. TeXtreme fabrics come in three different strengths. HS for High Strength, IM for intermediate modulus and HM for high modulus.

TeXtreme Technology Comparison

This material has been lightly coated on one side with a formulated epoxy binder to hold the material together for handling and cutting. This material will not fray apart when cut and has similar working properties to a prepreg. The weight of the fabric does not include the weight of the binder, however the weight of the binder can be included in the amount of epoxy needed for the laminate. For the best cosmetics, the side without the binder should be placed onto the mold surface. The fabric is shipped with a plastic liner on one side to prevent the binder from sticking to the layer beneath it. The binder will start to soften at 65° F for improved processing at room temp.

TeXtreme Short Part # 5020
TeXtreme Detailed Spec TeXtreme 76 UD M30SC WO/50:76
Warp Tape Carbon Fiber M30SC 18k 50C 76gsm
Weft Tape n/a
Stabilizing Material NM688 - 5gsm
Total Fiber Weight 76gsm/2.24oz
Weave Pattern Uni Directional
Sizing Epoxy Compatible
Width of tape 50mm
Thickness of one ply laminate @60% VF: 0.076mm
Fiber Strength IM
Storing Dry and Below 86° F
UV Sensitive No
Shelf Life No limitation
Link to TeXtreme Technical Data Sheet Available Upon Request
Link to TeXtreme User Guide How to make the best use of TeXtreme
Link to TeXtreme Product Sheet TeXtreme Product Overview
Link to TeXtreme SDS Available Upon Request
Link to TeXtreme Facebook Facebook Page

Key Benefits to TeXtreme:

  • Reduced weight by 20% or more.
  • Able to achieve lighter and more cost effective material than any 1k carbon fabric
  • Smoother and less porous surface finish than traditional woven fabrics
  • Unique, distinct and highly desirable appearance
  • Increased marketing benefit for using materials that are currently in use in F-1 and NASCAR racing
  • Less Epoxy needed which lowers Epoxy Costs

Where is TeXtreme Used? TeXtreme is often used in only the highest quality parts you see around. It has become a standard material in Formula One Racing. This material also has been used in nearly every NASCAR Sprint Cup car you see on the track. Take a look inside Kurt Busch's dash cam next time you watch a race. You can easily see the distinguished TeXtreme material used inside the vehicle. This material also helped TEAM ORACLE USA to victory in the Americas Cup. As you can see these are the best of the best and TeXtreme gives each team the advantage in these sports to deliver the most performance possible. As for commercial goods. Bauer hockey sticks and a few golf shaft manufacturers have developed class leading products with the use of TeXtreme materials. If you want the best of the best, TeXtreme is it.

If you do not see what you like here contact us for more TeXtreme Spread Tow reinforcement options, consisting of either UD tapes or fabrics. We have capabilities to provide the fabrics with different weight tape in the warp and the weft. We can do an 80gsm tape in the warp and a 40gsm tape in the weft which would be useful for making surfboards or other applications where you need more strength in the one direction vs the other. We also are able to arrange a weave in various degrees so you can choose a fabric that has the fiber oriented in the perfect angle for your product to achieve the absolute best performance possible. We also have capabilities to provide other material types such as aramid, zylon, Innegra. The fibers can be woven together, side by side or spread evenly through the same tape.

To harden the raw fabric into a usable form, you will need the appropriate resin or epoxy for your project.

We take care in shipping our items and we will never fold the fabric. Our fabric is always rolled to prevent distortion of the weave. This fabric has a plastic liner in between the layers of fabric to add even more protection and to prevent the epoxy binder from adhering to the layer below.

This item is sold by the 100M roll.