8086 Infusible Polyester Resin 1 Gallon with Hardener. This is a polyester resin made for infusion. This resin has a very low viscosity and will solve many infusion flow problems. This is one of the easiest to use resins we have come across. This resin comes with 4 oz of AZOX hardener which will be more than you will need. This resin does have UV protection and should stand the harsh environments of years in the sun.
This product is produced here in the USA by CCP to ensure you receive a quality product.
This material is brown in color, however since you are infusing it, your resin layer will be so thin that you will not notice the tint of the resin. You possibly would notice on a bright solid white fabric but almost every other fabric you will not notice the color at all. This resin is rated to withstand 180° F/82.2° C.
The appropriate amount of AZOX Hardener / Catalyst is included . Mixing instructions and measuring device are included as well.
|Viscosity at 77°F, Brookfield LVF #3 Spindle @ 50 rpm||85 cps|
|Weight per Gallon||9.0 lbs.|
|Reactivity @ 77°F (25°C) with 1.25% Norox AZOX||31°C (88°F)|
|Gel Time, Cup, 100g||20 minutes|
|Peak Exotherm, Cup, 100g||315°F|
The following table presents typical 100 gram cup gel time ranges for STYPOL 040-8086 resin using various peroxide initiators:
|Peroxide Type||Min,%||Max,%||Gel Time@ 1.25%/77°F|
|AAP/CHP Blend||750||0.9||2.4||26-30 minutes|
|MEKP/CHP Blend||MCP-75||1.2||2.6||50-54 minutes|
The item has a shelf life of approximately four months. To ensure proper results and proper curing, please make sure to use the resin shortly after purchase.
This item is in stock but due to short shelf life, this product may be shipped direct from the manufacturer. This may add 1-3 business days to lead time.
This item is flammable and can only be shipped by ground. If you paid for expedited shipping, we will refund you the difference for it to be shipped by ground.