RDR-2250 High Temperature Laminating Resin - Aluminum

Model:
1886
$80.00
HIGH TEMPERATURE
(Aluminum)
LAMINATING SYSTEM

RDR-2250 is a high temperature laminating system that cures at room temperature with post cure. It is extremely tough, has good dimensional stability with good heat distortion for tools requiring elevated temperatures.

Upon Completion, the tool should be allowed to cure at ambient temperature for 24 hrs. At that point, apply an oven cure, cycle should be 50°F per hour(tool temperature, not air temperature). Not more than 5°F per min.

1-Hour 100°F , 1-Hour 150°F,1-Hour 200°F,1-Hour 250°F,2-Hour 300°F, Back down the same

This product is sold by weight. 8 Lbs = aprox 1 Gallon; 50 Lbs = aprox 5 Gallons.

Use the RDR-2250 Resin with RDH-9106 or RDH-9234 Hardeners.

TYPICAL PHYSICAL PROPERTIES

RESIN PROPERTY HARDENERS
  RDH-9106 RDH-9234
Pot Life @ 72oF (200g mass) 90 minutes 165 minutes
Ratio by Weight 100 pbw to 12 pbw 100 pbw to 15 pbw
Ratio by Volume 5.2 to 1 5.5 to 1
Cure Time 24 hours 24 hours
Flexural Strength @ 72oF 36,400 38,400
Flexural Strength @350 5, 600 5,600
     
Heat Distortion 300oF 320oF
Hardness, Shore D @ 72oF 85 85
Density:    
Resin 12.5 12.5
Hardener 7.8 8.35
Mixed 12.0 10.4
Specific Gravity:    
Resin 1.50 1.50
Hardener .94 1.0
Mixed 1.45 1.25
Shelf Life Resin / Hardener 1 year 1 year

To ensure quality results and proper curing, please make sure to use the resin shortly after purchase. This resin is available in 1 Gallon & 5-Gal Pails, Drums and Totes.

SDS RDR 2250 SDS

pdfPremium Resin Tech Product List

PDF Epoxy Mixing Guide