BLACK SURFACE COAT
RDR-1902 is a high gloss, chemical resistant, high heat surface coat. RDR-1902 system is the recommended surface coat for use with high temperature laminating.
This product is sold by weight. 10 Lbs = aprox 1 Gallon; 50 Lbs = aprox 5 Gallons.
TYPICAL PHYSICAL PROPERTIES
|Pot Life @ 72oF (200g mass)||14 minutes||60 minutes|
|Ratio by Weight||100 pbw to 16 pbw||100 pbw to 16 pbw|
|Flexural Strength @ 72oF||15,000 psi||16,000 psi|
|Tensile Strength||9,500 psi||10,000 psi|
|Compressive Strength||15,000 psi||16,000 psi|
|Hardness, Shore D @ 72oF||90||90|
|Shelf Life Resin / Hardener||1 year||1 year|
|Cure Schedule||24 hours||24 hours|
Recommended Post Cure: If tool is used at high temperature.
Upon Completion, the tool should be allowed to cure at ambient temperature for 24 hrs.
Post cure cycle should be 50°F per hour (Tool Temperature, not air Temperature). Not more than 5°F per min.
To ensure quality results and proper curing, please make sure to use the resin shortly after purchase. This resin is also available in 5-Gal Pails, Drums and Totes.