Purple Aluminized Fiberglass Fabric 2x2 Twill 3k 50"/127cm 9.14oz/310gsm

Model:
F-1638
Unit of Measure:
Linear Yard
$29.99
Quantity Buy 5 - 9 Buy 10 - 24 Buy 25 - 49 Buy 50 - 99 Buy 100 or above
Per Linear Yard $ 28.49 $ 26.99 $ 26.39 $ 25.49 $ 23.39
Bulk Pricing
Qauntity
Per Linear Yard
Buy 5 - 9
Buy 10 - 24
Buy 25 - 49
Buy 50 - 99
Buy 100 or above
$ 28.49
$ 26.99
$ 26.39
$ 25.49
$ 23.39

Purple Aluminized Fiberglass Fabric/Cloth 50" 9.14oz 2x2 Twill. This fabric has a width of 50", and made to represent a carbon fiber tow size of 3k. Material is woven in a 2x2 twill weave. This is the most widely used pattern in the automotive industry. This material was woven by reputable weavers across the US, and their long lasting presence in the composite industry will ensure you receive a quality material.

To harden the raw fabric into a usable form, you will need the appropriate resin or epoxy for your project. For the colored materials, we suggest one of our resins which cure clear.

How we sell

This roll is 50" (127cm) wide and the fabric is sold by the linear yard. The unit price displayed is for 1 linear yard, all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased.

Please purchase the number of linear yards that you require. When purchasing multiple yards of the same fabric you will receive one continuous length of that material. We carefully take that material and roll it onto a cardboard core and wrap over with clear plastic or Kraft paper, making sure to keep the fabric in its first quality condition.  We pride ourselves as having one of the best material handing crews possible. We have most of our material available for purchase in sample swatch books per fabric category. Samples of our fabrics can be purchased by Clicking this Link.

Product Specs  
Unit of Measure Linear Yard
Material Warp Fiberglass
Material Weft Fiberglass
Weave 2x2 Twill
Ends Per Inch 20
Pics Per Inch 19
Weight 9.14oz / 310gsm
Width 50" / 127cm
Thickness 0.012" / 0.3mm
Resin Consumption @ 45% Resin to Fabric by Weight 7.47opsy / 251.30gsm

The resin consumption provided is for the approximate amount of resin by weight, contained in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and is dependent upon users techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, NOT stronger. Average rule of thumb is around 45% (+/- a couple percent). To calculate actual resin % in your part a burn test is used. For example you have a part weighing 100 grams, you would burn off the resin which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing it is hard to give an accurate amount of resin needed to purchase for making your part. However you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.