TeXtreme® 1017 – HS Spread Tow Carbon Fiber 12k 39.37″/100cm 4.72oz/160gsm DISCOUNTED REMNANTS

SKU: R-1120-39

$39.51$55.56

Clear
    Add to Compare

    Description

    TeXtreme 1017 – HS 160gsm/4.72oz 100cm/39.37″ Width Spread Tow Carbon Fiber Fabric. This special type of fabric is called Spread Tow fabrics or STF. STF increases the performance as well as reducing the laminate weight up to 20%. In this fabric, the carbon fiber tows are spread out into thin tapes ranging from 20mm up to 50mm in width. This particular fabric is constructed with 20mm width tape. In a typical woven 50″ 3k Plain Weave 200gsm fabric, you will have about 23,000 places where the weave overlaps or also called a crimp. Each crimp in the fabric has a minimal area where the excess resin will accumulate. With these TeXtreme fabrics, you eliminate the number of crimps by over 90%, eliminating the amount of area where excess resin can accumulate. They are tiny amounts, but you reduce over 21,000 of these super small resin pools in one yard. This reduction in excess resin will yield a part that is almost 20% lighter than a standard laminate. In addition to the lightweight advantages, you also have a very minimal fiber crimp which will yield parts as strong as a unidirectional laminate. TeXtreme fabrics come in three different strengths—HS for High Strength, IM for intermediate modulus, and HM for high modulus.

    First Quality Remnants:

    First Quality Fabric Remnant Rolls are short rolls of fabric, which have no defects in them.  These remnant rolls are either leftover fabric from the end of a roll or sections of fabric cut at the wrong length for a specific order.  So instead of discarding the short roll, we package it up and sell it as a First Quality Remnant Roll.  These First Quality Remnant Rolls are sold at 20% off of the retail price of that fabric.

    Second Quality Remnants:

    Second Quality Fabric Remnant Rolls are short rolls of fabric, which have a defect in the woven fabric in them.  These remnant rolls are cut out of the standard fabrics we sell but from sections of the rolls that may have some defects in them.  These defects make them not good to use if you want to make cosmetic parts, which have a perfect woven fabric in them but can be used as the inner layers of your parts, or if you are making small parts and can cut around the defects.  These Second Quality Remnant Rolls are sold at 25% off of the retail price of that fabric.

    All remnant rolls are rounded DOWN to the nearest ½ yard. So a remnant listed as 0.5 yards may actually be between 18” and 35” in length, and a remnant listed as 2.0 yards may actually be between 72” and 89” in length.

    TeXtreme Technology Comparison

    This material has been lightly coated on one side with a formulated epoxy binder to hold the material together for handling and cutting. This material will not fray apart when cut and has similar working properties to a prepreg. The weight of the fabric does not include the weight of the binder; however, the weight of the binder can be included in the amount of epoxy needed for the laminate. For the best cosmetics, the side without the binder should be placed on the mold surface. The fabric is shipped with a plastic liner on one side to prevent the binder from sticking to the layer beneath it. The binder will start to soften at 65° F for improved processing at room temp.

    Key Benefits to TeXtreme:

    • Reduced weight by 20% or more.
    • Able to achieve lighter and more cost-effective material than any 1k carbon fabric
    • Smoother and less porous surface finish than traditional woven fabrics
    • Unique, distinct, and highly desirable appearance
    • Increased marketing benefit for using materials that are currently in use in F-1 and NASCAR racing
    • Less Epoxy is needed, which lowers Epoxy costs.

    Where is TeXtreme Used? TeXtreme is often used in only the highest quality parts you see around. It has become a standard material in Formula One Racing. This material also has been used in nearly every NASCAR Sprint Cup car you see on the track. Take a look inside Kurt Busch’s dashcam next time you watch a race. You can easily see the distinguished TeXtreme material used inside the vehicle. This material also helped TEAM ORACLE USA to victory in the America’s Cup. As you can see, these are the best of the best, and TeXtreme gives each team the advantage in these sports to deliver the most performance possible. As for commercial goods. Bauer hockey sticks and a few golf shaft manufacturers have developed class-leading products using TeXtreme materials. If you want the best of the best, TeXtreme is it.

    If you do not see what you like here, contact us for more TeXtreme Spread Tow reinforcement options, consisting of either UD tapes or fabrics. We have capabilities to provide the fabrics with different weight tape in the warp and the weft. We can do an 80gsm tape in the warp and a 40gsm tape in the weft, which would be useful for making surfboards or other applications where you need more strength in one direction vs. the other. We also are able to arrange a weave in various degrees so you can choose a fabric that has the fiber oriented in the perfect angle for your product to achieve the absolute best performance possible. We also have capabilities to provide other material types such as aramid, zylon, Innegra. The fibers can be woven together, side by side, or spread evenly through the same tape.

    To harden the raw fabric into a usable form, you will need the appropriate resin or epoxy for your project.

     

    Additional information

    Remnant Quality

    ,

    Remnant Length

    , , ,

    Unit of Measure

    Brand

    Reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    Compare Products