Gold Aluminized Fiberglass Fabric 2x2 Twill 50"/127cm 9.14oz/310gsm
Gold Aluminized Fiberglass Fabric 2x2 Twill 50"/127cm 9.14oz/310gsm

Gold Aluminized Fiberglass Fabric 2×2 Twill 50″/127cm 9.14oz/310gsm

SKU: F-1615-50

$31.19

Out of Stock

Add to Compare

Enter your email address to be notified when this item is back in stock.
Categories: , ,

Please Note: Due to the nature of composite materials, coloration of fabric may change or darken when resin is introduced to your part/fabric.

Title Range Discount
Per Linear Yard 5 - 9 $29.63
Per Linear Yard 10 - 24 $28.07
Per Linear Yard 25 - 49 $26.51
Per Linear Yard 50 - 99 $25.89
Per Linear Yard 100 + $25.26

Description

This fabric has a width of 50″, and made to represent a carbon fiber tow size of 3k. Material is woven in a 2×2 twill weave. This is the most widely used pattern in the automotive industry. This material was woven by reputable weavers across the US, and their long lasting presence in the composite industry will ensure you receive a quality material.

To harden the raw fabric into a usable form, you will need the appropriate resin or epoxy for your project. For the colored materials, we suggest one of our resins which cure clear.

Additional information

Color

Ends Per Inch

20
Pics Per Inch

Thickness

Tow Size

Unit of Measure

Weave

Yarn Size Warp

Yarn Size Weft

Weight

Material Warp

Material Weft

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Our fabrics are sold by the linear yard. The unit price displayed is for 1 linear yard; all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased. Please purchase the number of linear yards that you require. When purchasing multiple yards of the same fabric, you will receive one continuous length of that material. We carefully take that material and roll it onto a cardboard core and wrap clear plastic or Kraft paper over it, making sure to keep the fabric in its first quality condition. We pride ourselves on having one of the best material handling crews possible.
Resin consumption is provided for the approximate amount of resin by weight in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and depends on the user’s techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, not stronger. The average rule of thumb is around 45% (+/- a couple of percent). To calculate actual resin % in your part, a burn test is used. For example, you have a part weighing 100 grams, and you would burn off the resin, which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing, it is hard to give an accurate amount of resin needed to purchase for making your part. However, you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.

Related products

Compare Products