Frekote PMC is a special blend of solvents designed to dissolve and remove wax from polyester molds without dulling the surface. PMC can also be used to clean epoxy and metal mold surfaces as well as for cleaning brushes and equipment. PMC is highly recommended for preparing polyester mold surfaces prior to mold sealing and release application.
FREKOTE PMC Mold Cleaner application instructions
Frekote PMC should be applied to the mold surface with a clean lint free cloth.
Wax and other mold residue will immediately begin to dissolve and should be removed from the surface with a second clean cloth while it is still dissolved in the Frekote PMC.
As the cloth becomes saturated with wax and mold residue dispose of it and use a new cloth.
Repeat process until composite and other mold residue is removed.
The mold is now ready for use.
Note: A simple test to assess mold cleanliness is the use of masking tape. A coated surface will allow easy release of masking tape, where as a wax free surface will allow good adhesion of masking tape.
Storage: The product is classified as flammable and must be stored in an appropriate manner in compliance with relevant regulations. Do not store near oxidizing agents or combustible materials. Store product in the unopened container in a dry location.
Optimal Storage: 8 °C/46°F to 21 °C/70°F. Storage below 8 °C/46°F or greater than 28 °C/82°F can adversely affect product properties.
This item is in stock but due to short shelf life, this product may be shipped direct from the manufacturer. This may add 1-3 business days to lead time.
This item is flammable and can only be shipped by ground.
There are no reviews yet.