Fiberglass Plain Weave Cloth Tape E-Glass 8.7oz/295gsm 50 Yard Roll

SKU: F-514

$22.83$178.83

Clear

Title Range Discount
Per Linear Yard 5 - 9 $22.37
Per Linear Yard 10 - 24 $21.69
Per Linear Yard 25 - 49 $21.23
Per Linear Yard 50 - 99 $20.55
Per Linear Yard 100 + $19.41
Add to Compare
Categories: , ,

Please Note: Due to the nature of composite materials, coloration of fabric may change or darken when resin is introduced to your part/fabric.

Description

These Fiberglass tapes are great for seams, joints, corners or cracks. Quick and easy to cut. Can be used with Epoxies and Polyester Resins. Tapes are woven with a Plain Weave which will not fray like chopped mat. Thickness .01″

Item is sold by the roll.  50 yards.

This fabric is available in 1″/2.5cm, 2″/5cm, 3″/7.5cm, 4″/10cm, 6″/15cm, 8″/20cm, and 12″/30cm widths.

0/5 (0 Reviews)

Additional information

Color

Ends Per Inch

Pics Per Inch

Resin Consumption

Thickness

Unit of Measure

Weave

Width

, , , , , ,

Weight

Material Warp

Material Weft

F-514 SDS

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

How We Sell - Fabrics

Our fabrics are sold by the linear yard, with the exception of our samples which are a single 4"x4" (or 5"x7") piece. The unit price displayed is for 1 linear yard; all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased.

Please purchase the number of linear yards that you require. When purchasing multiple yards of the same fabric, you will receive one continuous length of that material. We carefully take that material and roll it onto a cardboard core and wrap clear plastic or Kraft paper over it, making sure to keep the fabric in its first quality condition. We pride ourselves on having one of the best material handling crews possible.

Resin Consumption

Resin consumption is provided for the approximate amount of resin by weight in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and depends on the user’s techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, not stronger. The average rule of thumb is around 45% (+/- a couple of percent). To calculate actual resin % in your part, a burn test is used. For example, you have a part weighing 100 grams, and you would burn off the resin, which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing, it is hard to give an accurate amount of resin needed to purchase for making your part. However, you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.

Compare Products