Carbon Fiber/Red Kevlar Fabric 4×4 Twill 50″ 3k 7.22oz/245gsm

SKU: F-1236-50

$41.59

Out of Stock

Add to Compare

Enter your email address to be notified when this item is back in stock.

Categories: , ,


Title Range Discount
Per Linear Yard 5 - 9 $39.51
Per Linear Yard 10 - 24 $37.43
Per Linear Yard 25 - 49 $35.35
Per Linear Yard 50 - 99 $34.52
Per Linear Yard 100 + $33.69

Description

Carbon Fiber/Red Kevlar Fabric/Cloth 50″ 3k 7.22oz 245gsm 4×4 Twill. The material is a hybrid of carbon fiber and Kevlar. This fabric has a width of 50″, tow size of 3k and is woven in a 4×4 twill weave. This is unique pattern that is never seen in a hybrid until now. This material was woven by reputable weavers across the US, and their long lasting presence in the composite industry will ensure you receive a quality material.

To harden the raw fabric into a usable form, you will need the appropriate resin or epoxy for your project. For the colored materials, we suggest one of our resins which cure clear.

We take care in shipping our items and we will never fold the fabric. Our fabric is always rolled onto a tube to prevent distortion of the weave.

This item is listed by the linear yard, which is 36″ long by the 50″ width. If you purchase a qty of 2, you will receive one continuous piece of fabric 72″x50″ and so on. We will leave the fabric in one continuous piece.

Product Specs

Additional information

Unit of Measure

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

This roll is 50″ (127cm) wide, and the fabric is sold by the linear yard. The unit price displayed is for 1 linear yard; all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased. Please purchase the number of linear yards that you require. When purchasing multiple yards of the same fabric, you will receive one continuous length of that material. We carefully take that material and roll it onto a cardboard core and wrap clear plastic or Kraft paper over it, making sure to keep the fabric in its first quality condition. We pride ourselves on having one of the best material handling crews possible. We have most of our material available for purchase in sample swatch books per fabric category. Samples of our fabrics can be purchased by Clicking this Link.
Resin consumption is provided for the approximate amount of resin by weight in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and depends on the user’s techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, not stronger. The average rule of thumb is around 45% (+/- a couple of percent). To calculate actual resin % in your part, a burn test is used. For example, you have a part weighing 100 grams, and you would burn off the resin, which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing, it is hard to give an accurate amount of resin needed to purchase for making your part. However, you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.