Selecting materials for wrapping/covering existing parts in carbon fiber just got easier with our pre-made kits. These kits include all of the materials you need to cover your parts in carbon fiber to give them that desired look. You can also use these kits to produce parts entirely from carbon fiber as well.
The kits are available in three different sizes with the following Carbon Fiber options:
- Carbon Fiber Fabric – 3k 5.7oz Plain Weave 50″
- Carbon Fiber Fabric 2×2 Twill Weave 50″ 3k 5.7oz
- Carbon Fiber Red Kevlar Fabric – 3k 5.5oz 2×2 Twill Weave 50″
- Carbon Fiber Blue Kevlar Fabric – 3k 5.5oz 2×2 Twill Weave 50″
- Silver Aluminized Fiberglass Fabric – 2×2 Twill 50″ 9.14oz
Each kit also includes the below materials.
|Line Item||Model||Description||Small Kit||Medium Kit||Large Kit|
|1||Varies||Carbon Fiber Fabric Choice||Yard (50″x36″)||2 Yards (50″x72″)||3 Yards (50″x108″)|
|2||1159-Gallon|1160-1/2_Gallon-Kit||2:1 Thin Epoxy Resin with Hardener||48oz Kit (1 Qt epoxy with 16oz hardener)||96oz Kit (1/2 Gal epoxy with 1 Qt hardener)||144oz (3 Qt epoxy with 1.5 Qt hardener)|
|3||667||Black Pigment for Basecoat||1oz||1oz||1oz|
|4||496||Partall Paste #2 Wax||24 oz||24 oz||24 oz|
|5||409||Nitrile Gloves Disposable||8 pair||8 pair||8 pair|
|6||966||4″ Spreader||3 pcs||3 pcs||3 pcs|
|7||402||Measuring Cup||2 pcs||2 pcs||2 pcs|
|8||1143||Epoxy Mixing Tub with Measurements 16oz||3 pcs||3 pcs||3 pcs|
|9||1997-1″||Bristle Brush 1″||3 pcs||3 pcs||3 pcs|
|10||952||Mixing Sticks||6 pcs||6 pcs||6 pcs|
|11||Basic Instruction Guide||1 pc||1 pc||1 pc|
All of these items in the kit are available for purchase individually in our store. If you run out of a certain material all items in this can can be purchased separately.
This resin uses a 2:1 hardener. Mixing 2 parts epoxy to 1 part hardener will give you the appropriate final mixture.
The 2:1 hardener has a pot life of 35-40 minutes at 80° F, set time of 5-6 hours and a drying time of 24-48 hours. This epoxy is NON-blushing.
This is considered to be a slow hardener, Our 3:1 and 4:1 hardener epoxies will cure much faster. However this 2:1 hardener will provide you with the maximum working time possible and should not be used in temps under 70° F unless a very long curing time is needed. Slow hardener should be used at temperatures above 80° F for optimal overnight curing.
ALL KIT photos are of small size kits. Kit items of equal or like value may be substituted based on inventory and availability.