Sale!

2nd Quality Copper Metalized Carbon Fiber Fabric 2×2 Twill 3k 50″/127cm 6oz/203gsm Toray T300

SKU: F-2265-50-2Q

$42.89

In Stock

    Add to Compare

    Description

    Copper Metalized 2×2 Twill Carbon Fiber Fabric/Cloth 50″ 3k 6oz 203.43gsmThis Fabric is Toray T-300 carbon fiber. This fabric has a width of 50″, tow size of 3k and is woven in a 2×2 twill weave. This is the most widely used pattern in the automotive industry. This material is woven tighter than most of our competitors’ fabrics. This will help ensure a straight weave and a better looking final product.

    Note this is a 2nd quality fabric and may contain minor flaws where the weave has small gaps in it. Copper coating on fabric does not fully cover the fabric.

    This is 100% Carbon Fiber which has a copper metalized coating applied to one side. This means that this carbon fiber cloth has been coated with real copper metal. It has been coated in a very fine mist which is thick enough to obtain the beauty of natural copper but thin enough to let resin permeate the material and keep the fabric conformable. One side is Copper, the other side is Black.

    To harden the raw fabric into a usable form, you will need the appropriate resin or epoxy for your project.

    Additional information

    Unit of Measure

    Tow Size

    Reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    This roll is 50″ (127cm) wide, and the fabric is sold by the linear yard. The unit price displayed is for 1 linear yard; all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased. Please purchase the number of linear yards that you require. When purchasing multiple yards of the same fabric, you will receive one continuous length of that material. We carefully take that material and roll it onto a cardboard core and wrap clear plastic or Kraft paper over it, making sure to keep the fabric in its first quality condition. We pride ourselves on having one of the best material handling crews possible. We have most of our material available for purchase in sample swatch books per fabric category. Samples of our fabrics can be purchased by Clicking this Link.
    Resin consumption is provided for the approximate amount of resin by weight in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and depends on the user’s techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, not stronger. The average rule of thumb is around 45% (+/- a couple of percent). To calculate actual resin % in your part, a burn test is used. For example, you have a part weighing 100 grams, and you would burn off the resin, which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing, it is hard to give an accurate amount of resin needed to purchase for making your part. However, you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.
    Compare Products