Sale!

2nd Quality Carbon Fiber Fabric Plain Weave Intermediate Modulus 6k 49.75″/126.36cm 6.13oz/208gsm Hexcel IM7

SKU: F-1812-50-2Q

$21.52

Out of Stock

Add to Compare

Enter your email address to be notified when this item is back in stock.

Categories: , ,

Please Note: Due to the nature of composite materials, coloration of fabric may change or darken when resin is introduced to your part/fabric.

Description

This fabric is made from high strength Hexcel IM7 Yarn – This fabric has a width of 49.75″, tow size of 6k and is woven in a plain weave. This 6k IM7 Carbon Yarn is a smaller looking yarn vs a normal 6k Carbon yarn. Due to the size of the fiber, this 6k fabric gives the appearance of a 3k. This material has a very unique visual appearance. Thickness .009″. This fabric is great for structural buildup and will yield a much stiffer product than a standard modulus 208 gsm fabric.

This is a 2nd Quality Fabric

This roll is 49.75″ (126.36cm) wide and the fabric is sold by the linear yard. The unit price displayed is for 1 linear yard, all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased.

Additional information

Color

Ends Per Inch

12

Pics Per Inch

Unit of Measure

Yarn Size Warp

Yarn Size Weft

Width

Weight

Tow Size

Material Warp

Material Weft

Weave

Modulus

Shipping

Brand

Hexcel IM7 TDS

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Our fabrics are sold by the linear yard. The unit price displayed is for 1 linear yard; all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased. Please purchase the number of linear yards that you require. When purchasing multiple yards of the same fabric, you will receive one continuous length of that material. We carefully take that material and roll it onto a cardboard core and wrap clear plastic or Kraft paper over it, making sure to keep the fabric in its first quality condition. We pride ourselves on having one of the best material handling crews possible.
Resin consumption is provided for the approximate amount of resin by weight in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and depends on the user’s techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, not stronger. The average rule of thumb is around 45% (+/- a couple of percent). To calculate actual resin % in your part, a burn test is used. For example, you have a part weighing 100 grams, and you would burn off the resin, which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing, it is hard to give an accurate amount of resin needed to purchase for making your part. However, you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.
Compare Products