FREE Shipping on all orders over $50.00!

PRO-SET LAM-229 Slow Laminating Hardener

Model: 1790

Starting at: $61.15

Please Choose:

  • Description
  • Details
  • Reviews

This listing is for PRO-SET LAM-229 Hardener Only. You will need to purchase one of the PRO-SET Laminating Resins below to use with this hardener.

PRO-SET LAM-125 Low Viscosity Laminating Resin 
PRO-SET LAM-135 Medium Viscosity Laminating Resin
PRO-SET LAM-145 Thixotropic Viscosity Laminating Resin 
PRO-SET LAM-151-HT High Temp Laminating Resin

** If any of the above links do not take you to a product listing, it would indicate that product is not in stock.

PRO-SET Laminating Epoxies are a versatile system of liquid resins and hardeners designed to meet a wide range of wet lay-up laminating applications.



Any Standard PRO-SET Laminating resin may be combined with any PRO-SET Laminating hardener to create a "custom" epoxy blend. PRO-SET Laminating hardeners range from fast to extra slow and may be blended to provide even greater versatility with your custom processes.

Choose resin by viscosity and hardener by speed. To simplify the choice, Standard PRO-SET Laminating resins and hardeners are priced the same (except for High-Temp).


Use PRO-SET Laminating Epoxies to produce lightweight, high performance composite structures that will withstand long-term cyclic loading in the harshest environments. These epoxies bond to core materials, wood, metal and all reinforcing fabrics. They offer excellent moisture resistance, toughness and superior resistance to heat and fatigue. PRO-SET Laminating Epoxies develop excellent physical properties at room temperature and may be post-cured for enhanced performance.

Laminating Epoxies can by dyed, upon request, to provide for visual quality control. A yellow dye in the resin and a blue dye in the hardener, when properly metered and thoroughly mixed, will result in a consistent shade of green.

LAM Hardener Selection

Property Standard LAM-224 Hardener LAM-226 Hardener LAM-229 Hardener LAM-237 Hardener LAM-239 Hardener1 LAM-251-HT Hardener1
150g Pot Life @ 77°F (25°C) ASTM D2471 13 min 52-59 min 93-100 min 128-163 min 165-250 min 164-253 min
500g Pot Life @ 77°F (25°C) ASTM D2471 12 min 45-52 min 73-84 min 102-107 min 110-165 min 124-175 min
Approx. working time @ 77°F (25°C)   40 min 2-3 hr 4-5 hr 7-8 hr 10-12 hr 7-8 hr

Hardeners can be blended for intermediate cure times
1 1 Not to be blended with other hardeners. Additional Post Cure Required.

Epoxy resin and hardener formulations have a long shelf life compared to many polymers. The minimum shelf life for the standard INF and LAM products is 3 years for resins and 2 years for hardeners (with the exception of LAM-251-HT). The minimum shelf life for LAM-251-HT and all ADV resins and hardeners is 18 months. Components of PRO-SET LAM-145 may settle during storage. We recommend a visual inspection and to stir the resin as needed.

Store PRO-SET Epoxy resins and hardeners at room temperature (65°F- 85°F) in sealed containers until shortly before use. As with many high-performance epoxy resins, repeated exposure to low temperatures during storage (<55°F) may cause the resin to crystallize. Be aware that containers placed near outside walls or on the floor will often be at a lower temperature than the ambient conditions.

If crystallization occurs, warm the resin to 125°F for 8 hours and stir to dissolve crystals. Hardeners may form carbamation when exposed to CO2 and moisture in the atmosphere for extended periods of time. Prevent carbamation by keeping containers sealed and pump reservoirs covered until immediately prior to processing.


TDSPRO-SET LAM-125 Epoxy with LAM-229 Hardener TDS
TDSPRO-SET LAM-135 Epoxy with LAM-229 Hardener TDS
TDSPRO-SET LAM-145 Epoxy with LAM-229 Hardener TDS

 PDF Epoxy Mixing Guide

  • Model: 1790
  • 97 Units in Stock
  • Manufactured by: PRO-SET

Be the first to write a review.  Write a Review.