FREE Shipping on all orders over $50.00!

Page 2

Q: How flexible are your panels?

A: The flexibility of our panels varies depending on the thickness and size of the panel. We will use a 12"x24" panel size as an example. Our .015" panel is our thinnest and most flexible panels. This panel will ben easily around an object like a pipe, however they will have a harder time with a curve that bends two ways. example would be trying to cover a basketball.

.015"/.4mm panel is very flexible and will bend around something as tight as a 2" diameter pipe.

.030"/.8mm panel will remain flexible and will bend around a 6" diameter pipe

.055"/1.4mm panel increases in rigidity and will bend around a 12" diameter pipe

.090"/2.3mm panel is where our panels become rigit. These panels remain quite stiff, however they will flex a little.

.165"/4.2mm panel will hardly flex at all

These thicknesses are to give an appoximation to someone who has never worked with our materials before. We have many other thicknesses available, all the way up to 1" thick.

Q: How are your panels shipped?

A: Our thinner panels are covered with a protective layer, then rolled and shipped in a large box. Our thicker panels are covered and shipped flat.

Q: Do you offer any other sizes of panels?

A: Yes, we offer panels in nearly any size up to 4ft by 6ft, in any thickness. Our best prices are for panels measuring by the ft mark. Example, 2ft by 3ft panel or 1ft by 4ft and so forth. Email us if you are in need of a size that we do not have listed online.

Q: Do you offer discounts or wholesale pricing?

A: Yes, we offer discounts for large orders, however me must be contaced previously to purchasing, in order to give a discount other than what is listed on our webpage.

Q: What is the difference between plain weave and 2x2 twill?

A: Plain weave is a pattern that is most commonly used in OEm applications. The plain weave pattern resembles a "checkerboard". The 2x2 twill style is the pattern used in most aftermarket applications, like hoods and wings. The pattern resembles a "zig-zag"

Q: Do you offer other services or products than the ones listed on your store?

A: Yes, We offer a variety of services, even the ability to take your prototype and mass produce your item using a state of the art, water-jet cutting service.

Other Information Regarding Our Items

1. Most of our panels are finished on one side and we do have panels that are finished on two sides. Panels are finished on one side unless noted in the title " Double Sided". Those panels are finished on two sides.

2. Our panels are cut roughly to the size listed. 12"x24" may have a quarter inch variance in dimension and the cut may not be perfectly square.

3. You can easily finish the edge of the panel with a light grit sand paper. Wet-sanding with 220 grit paper will bring up the edge quality of anything you decide to make.

4. Our panels include UV protection to prevent fading from the sun.

5. OPTIONAL: We offer *3M ADHESIVE* backing for all of our panels that we make. Pricing for the adhesive backing varies depending on the size of the panel.