Non Porous Teflon Coated Peel Ply 49.25"/125cm width Thickness .004"/ .11mm

Model:
1802
Unit of Measure:
Linear Yard
$11.95

Out of stock

Quantity Buy 5 - 9 Buy 10 - 24 Buy 25 - 49 Buy 50 - 99 Buy 100 or above
Per Linear Yard $ 11.71 $ 11.47 $ 11.23 $ 10.75 $ 10.16
Bulk Pricing
Qauntity
Per Linear Yard
Buy 5 - 9
Buy 10 - 24
Buy 25 - 49
Buy 50 - 99
Buy 100 or above
$ 11.71
$ 11.47
$ 11.23
$ 10.75
$ 10.16

NON-POROUS TEFLON COATED PEEL PLY is a light weight extra smooth TFE coated glass fabric. It will leave little or no fabric imprint on most composite lay-ups. It is used as a release fabric where there is no requirement for bleeding or breathing resin from the composite lay-up. This fabric is for release only. In use on a composite part, it will tend to hold all the resin within the composite matrix during cure. The surface of the composite part will be retain it's resin content and tend to have a very high gloss sheen to the surface area. This material is usually used with prepreg so you can control the resin content in your parts. Since this will not allow resin to pass through, it will not work with infusion. Thickness is .004"/.11mm

This item is listed by the linear yard, which is 36" long by the 49.25" width. If you purchase a qty of 2, you will receive one continuous piece of fabric 72"x49.25" and so on. We will leave the fabric in one continuous piece.