Hexcel HexForce Fiberglass S-Glass Plain Weave 30"/76.2cm 3.6oz/123gsm Style 4522 F81 Finish

Unit of Measure:
Linear Yard
Quantity Buy 5 - 9 Buy 10 - 24 Buy 25 - 49 Buy 50 - 99 Buy 100 or above
Per Linear Yard $ 6.31 $ 6.18 $ 6.05 $ 5.80 $ 5.47
Bulk Pricing
Per Linear Yard
Buy 5 - 9
Buy 10 - 24
Buy 25 - 49
Buy 50 - 99
Buy 100 or above
$ 6.31
$ 6.18
$ 6.05
$ 5.80
$ 5.47

Fiberglass 3.6oz S Glass 30" Plain Weave Hexcel Style 4522 F81 Finish. S-glass creates about a 25-30% increase in breaking strength from the E-glass. Used in applications where the highest possible strength is required while keeping weight to a minimum. This material was made by Hexcel, a leading manufacturer of composite materials in the USA, and their long lasting presence in the composite industry will ensure you receive a quality material.

To harden this material you will need to use one of our Epoxies or Resins.

How we sell

This roll is 30" (76.2cm) wide and the fabric is sold by the linear yard. The unit price displayed is for 1 linear yard, all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased.

Please purchase the number of linear yards that you require. When purchasing multiple yards of the same fabric you will receive one continuous length of that material. We carefully take that material and roll it onto a cardboard core and wrap over with clear plastic or Kraft paper, making sure to keep the fabric in its first quality condition.  We pride ourselves as having one of the best material handing crews possible. We have most of our material available for purchase in sample swatch books per fabric category. Samples of our fabrics can be purchased by Clicking this Link.

Product Specs  
Unit of Measure Linear Yard
Material Warp Fiberglass
Material Weft Fiberglass
Finish F81
Weave Plain Weave
Ends Per Inch 24
Pics Per Inch 22
Weight 3.6oz / 123gsm
Width 30" / 76.2cm
Thickness 0.0051" / 0.13mm
Resin Consumption @ 45% Resin to Fabric by Weight 2.94opsy / 98.98gsm

The resin consumption provided is for the approximate amount of resin by weight, contained in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and is dependent upon users techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, NOT stronger. Average rule of thumb is around 45% (+/- a couple percent). To calculate actual resin % in your part a burn test is used. For example you have a part weighing 100 grams, you would burn off the resin which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing it is hard to give an accurate amount of resin needed to purchase for making your part. However you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.

SDSFiberglass 3.6oz S Glass 30" Plain Weave Hexcel Style 4522 SDS

TDSFiberglass 3.6oz S Glass 30" Plain Weave Hexcel Style 4522 TDS

PDFHexcel Fiberglass Finishes