Fiberglass E-Glass Plain Weave 50"/127cm 9.41oz/ 319.05gsm Hexcel Style 7500 F16 Finish

Model:
F-1028
Unit of Measure:
Linear Yard
$6.79
Quantity Buy 5 - 9 Buy 10 - 24 Buy 25 - 49 Buy 50 - 99 Buy 100 or above
Per Linear Yard $ 6.65 $ 6.52 $ 6.38 $ 6.11 $ 5.77
Bulk Pricing
Qauntity
Per Linear Yard
Buy 5 - 9
Buy 10 - 24
Buy 25 - 49
Buy 50 - 99
Buy 100 or above
$ 6.65
$ 6.52
$ 6.38
$ 6.11
$ 5.77

Fiberglass E-glass Plain Weave   9.41oz/ 319.05gsm  Hexcel Style 7500 F16 Finish. This material lays well, and is cleaner to work with than the chopped strand mats since it is a woven cloth. This material was made by Hexcel, a leading manufacturer of composite materials in the USA, and their long lasting presence in the composite industry will ensure you receive a quality material.

To harden this material you will need to use one of our Epoxies or Resins.

How we sell

This roll is 50" wide and sold by the linear yard. The unit price displayed is for 1 linear yard, all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased.

Please purchase the number of linear yards that you require. When purchasing multiple yards of the same fabric you will receive one continuous length of that material. We carefully take that material and roll it onto a cardboard core and wrap over with clear plastic or Kraft paper, making sure to keep the fabric in its first quality condition.  We pride ourselves as having one of the best material handing crews possible. We have most of our material available for purchase in sample swatch books per fabric category. Samples of our fabrics can be purchased by Clicking this Link.

Product Specs  
Unit of Measure Linear Yard
Material Warp Fiberglass
Material Weft Fiberglass
Finish F16
Weave Plain Weave
Ends Per Inch 14
Pics Per Inch 16
Weight 9.41oz / 319gsm
Width 50"/127cm
Thickness 0.0118" / 0.30mm
Resin Consumption @ 45% Resin to Fabric by Weight 7.69opsy / 258.73gsm

The resin consumption provided is for the approximate amount of resin by weight, contained in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and is dependent upon users techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, NOT stronger. Average rule of thumb is around 45% (+/- a couple percent). To calculate actual resin % in your part a burn test is used. For example you have a part weighing 100 grams, you would burn off the resin which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing it is hard to give an accurate amount of resin needed to purchase for making your part. However you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.

SDSFiberglass E-glass 9.41oz Width Plain Weave Hexcel Style 7500 SDS

TDSFiberglass E-glass 9.41oz Width Plain Weave Hexcel Style 7500 TDS

PDFHexcel Fiberglass Finishes