D5300 High Performance Release Film 60" width RED. D5300 is a fluoropolymer film ETFE that provides excellent release in critical contour lay-ups. This material is used with prepreg which will let air and gasses through it, however will not let the resin pass through. This keeps your prepreg with the perfect resin % while allowing the gasses and air bubbles to be removed from the laminate. You must use this film (or similar ETFE film) with prepreg or you will have poor results.
|Tensile Strength (psi)||7,000|
|Tear Resistance (N/mm)||MD |
|Melt Point||480°F / 240°C|
|Maximum Use Temperature||450°F/232°C|
First Quality Remnants:
First Quality Fabric Remnant Rolls are short rolls of fabric, which have no defects in them. These remnant rolls are either left over fabric from the end of a roll, or sections of fabric which were cut at the wrong length for a specific order. So instead of discarding the short roll, we package it up and sell it as a First Quality Remnant Roll. These First Quality Remnant Rolls are sold at 20% off of the retail price of that fabric.
Second Quality Remnants:
Second Quality Fabric Remnant Rolls are short rolls of fabric, which have a defect in the woven fabric in them. These remnant rolls are cut out of the standard fabrics we sell, but from sections of the rolls that have some defects in them. These defects make them not good to use if you want to make cosmetic parts, which have perfect woven fabric in them, but can be used as the inner layers of your parts, or if you are making small parts and can cut around the defects. These Second Quality Remnant Rolls are sold at 25% off of the retail price of that fabric.
All remnant rolls are rounded DOWN to the nearest ½ yard. So a remnant listed as 0.5 yards may actually be between 18” and 35” in length and a remnant listed at 2.0 yards may actually be between 72” and 89” in length.