Composite Envisions Vinyl Ester Infusion Resin 1 Gallon with Hardener MEKP 925

Ground Only
Quantity Buy 5 or above
Per $ 70.92
Bulk Pricing
Buy 5 or above
$ 70.92

This vinylester infusion resin is a low viscosity, corrosion resistant, resin for use in various applications where added strength and heat resistance are needed but without the cost of an epoxy. Vinylester resin will flow and infuse very well just like a polyester but will have added properties such as higher temperature resistance - 210° F, lower shrink and added stiffness. Vinylester is a great way to add properties to the final product without adding much cost. A good vinylester resin will be about as good as a low grade epoxy. This resin can be used in other applications such as centrifugal casting, pultrusion, and RTM applications.

This resin will come with the appropriate amount of MEKP 925 hardener needed to cure off the resin.

Viscosity, Brookfield Model LV #2 Spindle @ 60 rpm, 77°F (25°C) 100 cps
100 grams resin @ 77°F (25°C), initiated with 1.2% MEKP-925H by volume *  
Gel Time 35 minutes
Heat Distortion Point at 264 psi 226°F/108°C
Specific Gravity @ 25°C 1.04

Vinyl ester label

SDSVinyl Ester Infusion Resin SDS

TDS Vinyl Ester Infusion Resin TDS

SDSMEKP (Methyl Ethyl Ketone Peroxide) SDS