Carbon Fiber/Kevlar Fabric Plain Weave 1140d 5oz/170gsm

Model:
F-615
Unit of Measure:
Linear Yard
$7.65
Quantity Buy 5 - 9 Buy 10 - 24 Buy 25 - 49 Buy 50 - 99 Buy 100 or above
Per Linear Yard $ 7.50 $ 7.27 $ 7.04 $ 6.81 $ 6.50
Bulk Pricing
Qauntity
Per Linear Yard
Buy 5 - 9
Buy 10 - 24
Buy 25 - 49
Buy 50 - 99
Buy 100 or above
$ 7.50
$ 7.27
$ 7.04
$ 6.81
$ 6.50

Carbon Fiber/Kevlar Fabric/Cloth 5oz Plain Weave TAPE. The material is a hybrid of carbon fiber and Kevlar. This fabric has a tow size of 3k carbon and 1140 Kevlar. Woven in a plain weave. This material was woven by reputable weavers across the US, and their long lasting presence in the composite industry will ensure you receive a quality material. This material gives you high strength capabilities with the impact resistance of Kevlar. Thickness .010"

To harden the raw fabric into a usable form, you will need the appropriate resin or epoxy for your project. For the colored materials, we suggest one of our resins which cure clear.

We take care in shipping our items and we will never fold the fabric. Our fabric is always rolled to prevent distortion of the weave.

This item is listed by the linear yard, which is 36" long by the selected width. If you purchase a qty of 2, you will receive one continuous piece of fabric 72"x the selected width and so on. We will leave the fabric in one continuous piece.

Product Specs  
Unit of Measure Linear Yard
Material Warp Carbon Fiber
Material Weft Kevlar
Weave Plain Weave
Ends Per Inch 12.5
Pics Per Inch 12.5
Yarn Size Warp 3k
Yarn Size Weft 1140d
Tow Size 3k x 1140d
Weight 5oz / 169.53gsm
Width 4"/10.16cm, 6"/15.24cm
Thickness 0.01" / 0.25mm
Resin Consumption @ 45% Resin to Fabric by Weight 4.09opsy / 137.47gsm 

The resin consumption provided is for the approximate amount of resin by weight, contained in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and is dependent upon users techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, NOT stronger. Average rule of thumb is around 45% (+/- a couple percent). To calculate actual resin % in your part a burn test is used. For example you have a part weighing 100 grams, you would burn off the resin which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing it is hard to give an accurate amount of resin needed to purchase for making your part. However you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.