Carbon Fiber Fabric 5 Harness Satin 6k 50"/127cm 8.41oz/285gsm IM7

Model:
F-2164
Unit of Measure:
Linear Yard
Width:
50"
Tow Size:
6k
Weight:
8.41oz
Weave:
5 HS
Modulus:
Intermediate
$29.99

Out of stock

Quantity Buy 5 - 9 Buy 10 - 24 Buy 25 - 49 Buy 50 - 99 Buy 100 or above
Per Linear Yard $ 28.49 $ 27.89 $ 26.99 $ 26.39 $ 25.49
Bulk Pricing
Qauntity
Per Linear Yard 50" 6k 8.41oz 5 HS Intermediate
Buy 5 - 9
Buy 10 - 24
Buy 25 - 49
Buy 50 - 99
Buy 100 or above
$ 28.49
$ 27.89
$ 26.99
$ 26.39
$ 25.49

5 Harness Satin Weave Carbon Fiber Fabric/Cloth 50" 6k 8.41oz IM7 . This fabric has a width of 50", tow size of 6k and is woven in a 5 harness satin weave. This material has a very unique visual appearance and also drapes very well over curves.

To harden the raw fabric into a usable form, you will need the appropriate resin or epoxy for your project.

How we sell

This roll is 50" (127cm) wide and the fabric is sold by the linear yard. The unit price displayed is for 1 linear yard, all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased.

Please purchase the number of linear yards that you require. When purchasing multiple yards of the same fabric you will receive one continuous length of that material. We carefully take that material and roll it onto a cardboard core and wrap over with clear plastic or Kraft paper, making sure to keep the fabric in its first quality condition. We pride ourselves as having one of the best material handing crews possible. We have most of our material available for purchase in sample swatch books per fabric category. Samples of our fabrics can be purchased by Clicking this Link.

Product Specs  
Unit of Measure Linear Yard
Material Warp Carbon Fiber
Material Weft Carbon Fiber
Weave 5 Harness Satin Weave
Ends Per Inch 16
Pics Per Inch 16
Yarn Size Warp 6k
Yarn Size Weft 6k
Tow Size 6k
Weight 8.41oz / 285gsm
Width 50" / 127cm
Resin Consumption @ 45% Resin to Fabric by Weight 6.88opsy / 231.23gsm
The resin consumption provided is for the approximate amount of resin by weight, contained in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and is dependent upon users techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, NOT stronger. Average rule of thumb is around 45% (+/- a couple percent). To calculate actual resin % in your part a burn test is used. For example you have a part weighing 100 grams, you would burn off the resin which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing it is hard to give an accurate amount of resin needed to purchase for making your part. However you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.

 

USA