2x2 Twill Carbon Fiber Fabric/Cloth 3k 5.8oz/197gsm HEXCEL 284 PRIMETEX. This fabric has a special process applied to it that spreads out the fibers to create a fabric with over 99% fiber coverage, thus eliminating nearly all gaps in the weave of the fabric. Not only is this is one of the nicest looking carbon fiber we offer, but this Primetex finish also makes a more even part with minimal excess resin deposits. This fabric is perfect for manufacturing parts and also is the same style of fabric used in the high dollar OEM carbon fiber parts. This material gives the best cosmetic appearance available while remaining easily drapeable. Material is woven here in the USA to ensure high quality standards. Fabric is produced by Hexcel.
PrimeTex® is a range of carbon fabrics which have been processed for a smooth, closed weave and uniform cosmetic appearance. The fiber tows are spread in both the warp and weft direction for unique aesthetic appeal. PrimeTex® fabrics are more uniform as the filaments in each tow are spread out creating a thinner and more closely woven fabric that provides better mechanicals and less porosity in a composite. It can also be used to lower the mass in a composite where lighter weight is the key characteristic.
- Patented technology with fibers spread in both the warp and weft direction
- PrimeTex® spreading process improves closure factor compared to conventional weaving process (depending on carbon tow and Fabric Areal Weight)
- Use of higher K tow for a given Fabric Areal Weight (FAW)
- Weight saving: Up to 20% at affordable cost when replacing HS3K by IM12K
- Uniform weave and gap-free structure: porosity reduced / less labor for part finishing
- Excellent water tightness when used in honeycomb sandwich structures
- Laminate mechanical properties maintained after spreading process with reduced variability thanks to homogenous resin/fiber distribution
- Aircraft and helicopter sandwich structures and thin monolithic parts
- UAV/Light Aircraft market targeted by cost to weight
- Automotive structures (e.g. BMW roof)
- Sports equipment (e.g. skis)
To harden the raw fabric into a usable form, you will need the appropriate resin or epoxy for your project.
How we sell
This fabric is available in 50" (127cm) & 60" (152.4cm) widths and the fabric is sold by the linear yard. The unit price displayed is for 1 linear yard, all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased.
Please purchase the number of linear yards that you require. When purchasing multiple yards of the same fabric you will receive one continuous length of that material. We carefully take that material and roll it onto a cardboard core and wrap over with clear plastic or Kraft paper, making sure to keep the fabric in its first quality condition. We pride ourselves as having one of the best material handing crews possible. We have most of our material available for purchase in sample swatch books per fabric category. Samples of our fabrics can be purchased by Clicking this Link.
|Unit of Measure||Linear Yard|
|Material Warp||Carbon Fiber|
|Material Weft||Carbon Fiber|
|Ends Per Inch||12.5|
|Pics Per Inch||12.5|
|Yarn Size Warp||3k|
|Yarn Size Weft||3k|
|Weight||5.8oz / 196.65gsm|
|Width||50" / 127cm & 60" / 152.4cm|
|Thickness||0.009" / 0.23mm|
|Resin Consumption @ 45% Resin to Fabric by Weight||4.74opsy / 159.47gsm|
The resin consumption provided is for the approximate amount of resin by weight, contained in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and is dependent upon users techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, NOT stronger. Average rule of thumb is around 45% (+/- a couple percent). To calculate actual resin % in your part a burn test is used. For example you have a part weighing 100 grams, you would burn off the resin which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing it is hard to give an accurate amount of resin needed to purchase for making your part. However you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.