FREE Shipping on all orders over $50.00!


Carbon Fiber / Blue Kevlar Part Wrapping Kit w Clear Epoxy 2x2 Twill

Model: 724

Starting at: $81.99

Please Choose:




  • Description
  • Details
  • Reviews

Selecting materials for wrapping/covering existing parts in carbon fiber just got easier with our pre-made kits. These kits include all of the materials you need to cover your parts in carbon fiber to give them that desired look. You can also use these kits to produce parts entirely from carbon fiber as well. You will receive the following materials with the kit. We have 3 different kit sizes that will fit your needs.

 

LineItem  Model Description

Small Kit

Medium Kit

Large Kit 

 1

F-377

Carbon Fiber Blue Kevlar Fabric - 3k 5.5oz 2x2 Twill Weave 50"

1 Yard (50"x36")

2 Yards (50"x72")

3 Yards (50"x108")

 2

536-Kit

2:1 Thin Epoxy Resin with Hardener

48oz Kit (1 Qt epoxy with 16oz hardener)

96oz Kit (1/2 Gal epoxy with 1 Qt hardener)

144oz (3 Qt epoxy with 1.5 Qt hardener)

 3

667

Black Pigment for Basecoat

1oz

1oz

1oz

 4

496

Partall Paste #2 Wax

4oz

4oz

4oz

 5

409

Nitrile Gloves

8 pair

8 pair

8 pair

 6

966

4" Spreader

3 pcs

3 pcs

3 pcs

 7

402

Measuring Cup

2 pcs

2 pcs

2 pcs

 8

1143

Epoxy Mixing Tub with Measurements 16oz

3 pcs

3 pcs

3 pcs

 9

1165

Bristle Brush 1"

3 pcs

3 pcs

3 pcs

 10

952

Mixing Sticks

6 pcs

6 pcs

6 pcs

 11  

Basic Instruction Guide

1 pc

1 pc

1 pc

All of these items in the kit are available for purchase individually in our store. If you run out of a certain material we can sell any single item by itself.

This resin uses a 2:1 hardener. Mixing 2 parts epoxy to 1 part hardener will give you the appropriate final mixture.

The 2:1 hardener has a pot life of 35-40 minutes at 80° F, set time of 5-6 hours and a drying time of 24-48 hours. This epoxy is NON-blushing.

This is considered to be a slow hardener, Our 3:1 and 4:1 hardener epoxies will cure much faster. However this 2:1 hardener will provide you with the maximum working time possible and should not be used in temps under 70° F unless a very long curing time is needed.   Slow hardener should be used at temperatures above 80° F for optimal overnight curing.

****************** Cold Weather Warning ***************

If your epoxy arrives cold during shipment is must be allowed to acclimate to at least 75° F before using. Mixing this product below 75°F will increase the potential for under-mixed epoxy which will create wet or sticky areas on your surface. Cold temperatures will also trap more very tiny air bubbles during the mixing which cannot always be removed with the torch/heat gun. In addition applying the mixed epoxy in temps below 70 degrees F will drastically extend cure times. To warm the epoxy quickly we recommend using either a heat lamp, an electric heater or placing the closed bottles of epoxy in a tub of warm water for 30 minutes. Getting the epoxy too hot will result in a faster reaction time, so pay careful attention to what you're doing.

****************** Cold Weather Warning ***************

 Click on the link below for the Instruction Guide to Part Wrapping.

Part Wrapping Kit Instructions

 PDF Epoxy Mixing Guide

We also have an instructional video available for seperate purchase to help guide you through the part wrapping process.

video    Secrets of the Overlay Instructional Video

  • Model: 724
  • 52 Units in Stock

Be the first to write a review.  Write a Review.