A blend of solvents formulated to enhance the flow and leveling properties of Duratec primers and hi-gloss coatings.
- Matches the solvent cut of the Duratec product line.
- Low HAPS
- Low water content
- Efficient: Small additions of Duratec thinner quickly cut the viscosity of Duratec Primers and Topcoats.
Usage – For use with all Duratec products requiring thinning prior to use. Duratec Thinner enhances the flow and leveling properties of Duratec primers and hi-gloss coatings. The end result is reduced porosity and orange peel.
How to use:
Mix the Duratec.
1. Add Gel-X (if necessary) and catalyst.
2. If the viscosity is too high for spraying, add one ounce of Duratec Thinner per quart of Duratec. Mix, and evaluate the viscosity. Usually, no more than three ounces of Duratec Thinner are necessary per quart of Duratec.
3. Spray the Duratec.
Please view the Application Guide and Technical Data Sheet below for additional information on cure times, application methods, and equipment needed to properly use this material.