2nd Quality Copper Mirage™ Carbon Fiber 2x2 Twill Weave Fabric/Cloth 50" 3k 290gsm 8.6oz. This fabric has a width of 50", tow size of 3k and is woven in a 2x2 twill high density weave to make the fabric cosmetically the best it can be while keeping the fibers tight together. This unique weave for our Mirage™ line of carbon fiber is one of our most unique materials available. This material is a blend of carbon fiber and colored copper wire. This material represents an anodized look. To achieve this unique look, some colors start off with a real silver plated wire before they are colored to make sure the color is vibrant as possible. Due to the gauge of wire and twill weave style this fabric gives an extremely deep appearance. This material is special for Composite Envisions and we are the only supplier in the world for these high grade materials. If you are looking for a material to give that unique look, then here it is. There is no other fabric available that can compare to this material. This fabric is very beautiful in person and there is no way to capture the beauty in a photo. Check out our sample section if you want to order a set of samples.
NOTE: This is a 2nd Quality Material. There are lines in the warp, uneven weave spacing in spots and broken strands.
Material is 50"/127cm wide. 290gsm/8.6oz weight. Thickness 0.017". Carbon Fiber Tow used is 3k Hexcel AS4 Aerospace Grade Fiber.
To harden the raw fabric into a usable form, you will need the appropriate resin or epoxy for your project.
Color Disclaimer: Due to individual user's monitor settings, calibrations and lighting sources, the colors that appear on your screen may not be an exact representation of the actual product.
How we sell
This roll is 50" (127cm) wide and the fabric is sold by the linear yard. The unit price displayed is for 1 linear yard, all volume discounts will be automatically applied when selecting larger quantities of fabric when added to your shopping cart, as indicated in the table above with quantity discount ranges for units purchased.
Please purchase the number of linear yards that you require. When purchasing multiple yards of the same fabric you will receive one continuous length of that material. We carefully take that material and roll it onto a cardboard core and wrap over with clear plastic or Kraft paper, making sure to keep the fabric in its first quality condition. We pride ourselves as having one of the best material handing crews possible. We have most of our material available for purchase in sample swatch books per fabric category. Samples of our fabrics can be purchased by Clicking this Link.
|Unit of Measure||Linear Yard|
|Material Warp||Carbon Fiber|
|Ends Per Inch||15|
|Pics Per Inch||15.5|
|Yarn Size Warp||3k|
|Yarn Size Weft||32 gauge|
|Tow Size||3k x 32 gauge|
|Weight||8.6oz / 291.59gsm|
|Width||50" / 127cm|
|Thickness||0.017" /0.43 mm|
|Resin Consumption @ 45% Resin to Fabric by Weight||7.03opsy / 236.46gsm|
The resin consumption provided is for the approximate amount of resin by weight, contained in the final part after processing by vacuum infusion. This does not account for the resin used in the flow lines and consumables such as flow media or breather cloth. Wet-layup by hand will also have a higher resin consumption in the final part and is dependent upon users techniques. Vacuum bagging a wet layup will improve the resin content. Too much resin will cause a weaker part, NOT stronger. Average rule of thumb is around 45% (+/- a couple percent). To calculate actual resin % in your part a burn test is used. For example you have a part weighing 100 grams, you would burn off the resin which would leave the fiber behind. You should have 55 grams of fiber left when your process is working correctly. Due to the variables in processing it is hard to give an accurate amount of resin needed to purchase for making your part. However you will have waste no matter what method is used. A suggested ratio is about 1-1.5lbs of resin per lb of fabric purchased.