FREE Shipping on all orders over $50.00!


RDR-1302 High Temperature Aluminum Filled Surface Coat

Model: 1887

Starting at: $87.50

Please Choose:




  • Description
  • Details
  • Reviews

RDR-1302 is a high temperature, room setting epoxy surface coat. It has good vertical hang up, yet applies easily with a brush, making it especially versatile. It is also highly polishable.

RDR-1302 was specifically formulated for nickel mandrels, but will work well in a variety of applications. 

Use RDR-1302 with RDH-9106 or RDH-9302 Hardeners

This product is sold by weight. 10 Lbs = aprox 1 Gallon; 50 Lbs = aprox 5 Gallons.

TYPICAL PHYSICAL PROPERTIES

 

  RDH-9106 RDH-9302
Color Grey Grey
Pot Life @ 72oF (200g mass) 14 minutes  60 minutes
Viscosity  gel gel 
Ratio by Weight   100:16 100:16
Flexural Strength @ 72oF 15,000 psi   16,000 psi
Tensile Strength  9,500 psi   10,500 psi
Compressive Strength  15,000 psi   16,000 psi
Heat Distortion 350°F   350°F
Hardness, Shore “D” @ 72oF 90   90
Cure Schedule 24 Hours   24 Hours
Shelf Life Resin / Hardener 1 Year   1 Year

Recommended Post Cure: If tool is used at high temperature.

Upon Completion, the tool should be allowed to cure at ambient temperature for 24 hrs.  Post cure cycle should be 50 degrees per hour (Tool Temperature,not air Temperature). Not more than 5 degrees per min.

 SDSRDR-1302 SDS

TDSRDR-1302 TDS

  • Model: 1887
  • 10 Units in Stock

Be the first to write a review.  Write a Review.