This listing is for PRO-SET INF-212 Hardener Only. You will need to purchase PRO-SET Epoxy INF-114 to use with this hardener.
** If the above link does not take you to a product listing, it would indicate that product is not in stock.
PRO-SET Infusion Epoxies are super low viscosity systems with a range of hardeners to meet the demands of modern infusion processes.
STANDARD INFUSION SYSTEMS
PRO-SET Infusion Epoxies accommodate a vast range of process needs with a single resin and four hardeners. PRO-SET Infusion hardeners range from fast to extra slow, and may be blended to provide even greater versatility with your custom processes.
Choose resin by viscosity and hardener by speed.
Infusion Epoxies Hardeners may be blended for targeted cure time. Infusion process PRO-SET Infusion Epoxies result in lightweight, high performance composites that will withstand long term cyclic loading in the harshest environments. PRO-SET Infusion Epoxies develop excellent physical properties at room temperature and may be post-cured to further enhance performance.
Infusion Epoxies can be dyed, upon request, to provide for visual quality control. A yellow dye in the resin and a blue dye in the hardener, when properly metered and thoroughly mixed, will result in a consistent shade of green.
INF Hardener Selection
|150g Pot Life @ 77°F (25°C)
|500g Pot Life @ 77°F (25°C)
|Approx. working time @ 77°F (25°C)
Hardeners can be blended for intermediate cure times
1 1 Not to be blended with other hardeners.
PRO-SET INF-212 Hardener MSDS
PRO-SET INF-114 Epoxy with INF-212 Hardener TDS