The 150 Thick Epoxy Resin is a high quality resin system which works well for bonding, gluing and coating applications. This resin allows for high build rates. This resin should NOT be used for lamination of fiberglass, carbon fiber or kevlar because it will not wet-out the materials correctly. Resin viscosity: 12,500 cps.
This resin uses a 2:1 hardener. Mixing 2 parts epoxy to 1 part hardener will give you the appropriate final mixture.
The 2:1 hardener has a pot life of 35-40 minutes at 80 deg F, set time of 5-6 hours and a drying time of 24-48 hours. This epoxy is NON-blushing.
This is considered to be a slow hardener, Our 3:1 and 4:1 hardener epoxies will cure much faster. However this 2:1 hardener will provide you with the maximum working time possible and should not be used in temps under 70deg F unless a very long curing time is needed.
This product was added to our catalog on Wednesday 10 June, 2009.
