Selecting materials for wrapping/covering existing parts in carbon fiber just got easier with our pre-made kits. These kits include all of the materials you need to cover your parts in carbon fiber to give them that desired look. You can also use these kits to produce parts entirely from carbon fiber as well. You will receive the following materials with the kit. We have 3 different kit sizes that will fit your needs.
All of these items in the kit are available for purchase individually in our store. If you run out of a certain material we can sell any single item by itself.
This resin uses a 2:1 hardener. Mixing 2 parts epoxy to 1 part hardener will give you the appropriate final mixture.
The 2:1 hardener has a pot life of 35-40 minutes at 80° F, set time of 5-6 hours and a drying time of 24-48 hours. This epoxy is NON-blushing.
This is considered to be a slow hardener, Our 3:1 and 4:1 hardener epoxies will cure much faster. However this 2:1 hardener will provide you with the maximum working time possible and should not be used in temps under 70° F unless a very long curing time is needed. Slow hardener should be used at temperatures above 80° F for optimal overnight curing.
Click on the link below for the Instruction Guide to Part Wrapping.
Part Wrapping Kit Instructions
We also have an instructional video available for seperate purchase to help guide you through the part wrapping process.
Secrets of the Overlay Instructional Video