Selecting materials for wrapping/covering existing parts in carbon fiber just got easier with our pre-made kits. These kits include all of the materials you need to cover your parts in carbon fiber to give them that desired look. You can also use these kits to produce parts entirely from carbon fiber as well. You will receive the following materials with the kit. We have 3 different kit sizes that will fit your needs. This texalium is a little stiffer of a material so it will have a harder time wrapping around very complex curves. Texalium is referred to by many as "silver carbon fiber". Parts produced as silver carbon fiber are actually made from this texalium material.
| Small Kit | Medium Kit | Large Kit |
Silver Texalium Fabric - 2x2 Twill 50" | 1 Yard (50"x36") | 2 Yards (50"x72") | 3 Yards (50"x108") |
2:1 Thin Epoxy Resin with Hardener | 48oz Kit (1 Qt epoxy with 16oz hardener) | 96oz Kit (1/2 Gal epoxy with 1 Qt hardener) | 144oz (3 Qt epoxy with 1.5 Qt hardener) |
Black Pigment for Basecoat | 1oz | 1.5oz | 2oz |
Partall Paste #2 Wax | 4oz | 6oz | 8oz |
Latex Gloves | 4 pair | 8 pair | 12 pair |
3" Spreader | 1 pc | 2 pcs | 3 pcs |
Measuring Cup | 1 pc | 2 pcs | 3 pcs |
Epoxy Mixing Tub with Measurements | 1 pc | 2 pcs | 3 pcs |
Bristle Brush | 1 pc | 2 pcs | 3 pcs |
Mixing Sticks | 3 pcs | 6 pcs | 9 pcs |
Basic Instruction Guide | 1 pc | 1 pc | 1 pc |
| | | |
| | | |
All of these items in the kit are available for purchase individually in our store. If you run out of a certain material we can sell any single item by itself.
This product was added to our catalog on Thursday 29 July, 2010.
